| Eagle Eye Solar Panel Kit w/Bracket | |
![]() |
Power the Eagle Eye without the need for a 120v. power
source. Solar Panel can operate 1 or 2 Eagle Eyes. For
24-hour coverage use the panel to charge a 12v. battery.
Add the adjustable pole (adjusts from 4’ to 8’)
and make a portable unit that can be moved around (put
cement blocks on the base for safety).
Includes solar panel (7.5w), mounting bracket, voltage regulator and 12v. battery. |
| Eagle Eye Shield with Bracket | |
![]() |
This sheild attaches to the Eagle Eye support tube. The sheild can then be oriented to keep the flashing away from the building interior. |
| Eagle Eye Solar Mounting Bracket | |
![]() |
For use in mounting the Solar Panel to the Eagle Eye Pole Support (item code: HV-P04) in areas of direct sunlight to power your Eagle Eye system. |
| Eagle Eye 12V Battery | |
![]() |
Use this battery with the Solar Panel to insure operation of the Eagle Eye on cloudy days, in the late evening and early morning sun. |
| Eagle Eye Solar Panel | |
![]() |
7.5 W Solar Panel used to power the Eagle Eye in areas ofdirect sunlight - without a 120V Power Source. |
| Protective Pad | |
![]() |
These protective neoprene pads insure no damage is done to the roof when installing support poles. |
| Pole Cable Support 4'5" to 8' Tall | |
![]() |
These poles can be used to build raised netting systems. The poles can be used to keep the center cable higher (like a tent) or to raise a whole net system above a flat roof, or a roof covered with HVAC equipment.
The top of the pole has four holes designed to acommodate both perimeter net cable and turnbuckles. This flexibility allows the pole to accomodate a wide range of possible installations. The bolts half-way up the poles can be loosened to adjust the poles to the perfect height. By tensioning the cables equally in each direction, the flat base will simply sit in place. Protective neoprene pads insure no damage is done to the roof. Extend poles from 4.5 feet to 8 feet. Each pole includes one protective pad. |


